Autofiber CLAY-MITT-1 Clay Mitt Paint Decontamination Mitt 7"x9"

Autofiber CLAY-MITT-1 Clay Mitt Paint Decontamination Mitt 7"x9

The Autofiber Decon Clay Mitt is an easy-to-use paint decontamination mitt designed to remove embedded contaminants such as brake dust (listed as “break dust”), industrial fallout, overspray, and environmental pollution. Its synthetic rubber polymer pulls debris from the clear coat, leaving the surface smooth and ready for paint correction.

Key Benefits

• Helps remove embedded debris from paint and glass surfaces.
• Synthetic Rubber Polymer on a microfiber mitt for controlled decontamination.
• Medium Grade clay alternative (as listed).
• Rinses clean with water and can be air dried after use.
• Designed to be used with a clay lubricant or quick detail spray (required for safe use).

How to Use

• Always use lubrication: Use a clay lubricant or quick detail spray designed to lubricate the surface during decontamination.
• Break-in new mitts: Agitate the mitt on a glass surface for 1–2 minutes using the lubricant before first use.
• Decontaminate: Spray the mitt and the surface with lubricant and gently rub using a crosshatch pattern. Apply more lubricant as needed.
• Rinse & dry: Thoroughly rinse the mitt with water and air-dry when done.

Specifications

FAQ

• What does it remove? Embedded contamination such as brake dust (listed as “break dust”), industrial fallout, overspray, and environmental pollution.
• Do I need lubrication? Yes—this mitt should always be used with a clay lubricant or quick detail spray designed to lubricate the surface during decontamination.
• Do I need to prep a new mitt? Yes—new mitts should be broken in by agitating on a glass surface for 1–2 minutes with lubricant.