Dual Action Medium Cut
From
$23.80
Unit price
/
Unavailable
Description
Description
Symplex® Dual Action Medium Cut Optimized Polish Corrector
Dual Action Medium Cut is a premium, water-based polishing compound engineered for Dual Action (DA) and Forced Rotation polishers. Built with Ultra Cut Diminishing Abrasive Technology and advanced Aluminum Oxide micro-abrasives, it removes moderate paint imperfections while finishing with a high-gloss result.
What It Corrects
- Swirl marks
- Light scratches
- Oxidation
- Water spots
Key Features & Benefits
- Medium cut performance: aggressive enough for moderate defects, safe across many paint types.
- Optimized for DA & forced rotation polishers: designed to minimize the risk of holograms.
- Ultra Cut Diminishing Abrasive Technology: fast initial cut, then refines to a high-gloss finish as abrasives break down.
- Engineered Aluminum Oxide micro-abrasives: consistent polishing performance.
- Zero dusting and easy wipe-off: cleaner, faster workflow.
- Water-based formula: easy clean-up.
- Body shop safe (per manufacturer) for paint-prep workflows.
Recommended Pads & Use Cases
| Goal | Recommended Pad | Notes |
|---|---|---|
| Moderate defect removal | Medium-cut foam pad | Recommended for initial correction. |
| Refining / extra gloss | Softer polishing pad | Use lighter pressure and slower final passes. |
| Alternative pad options | Wool, microfiber, or foam | Manufacturer notes it can be used with medium-cut pads in these materials. |
How to Use (DA / Forced Rotation)
- Wash & dry the vehicle thoroughly.
- Decontaminate the paint (clay bar or clay mitt) if needed.
- Choose pad based on desired cut/finish (medium-cut foam for correction; softer pad for refining).
- Prime the pad with a small amount of product.
- Apply 3–4 pea-sized drops and work a section of approximately 2 ft x 2 ft.
- Start at low speed (about speed 1–2), then increase to speed 4–5.
- Apply moderate, consistent pressure, overlapping each pass by 50%. Use horizontal and vertical overlapping passes.
- For the final passes, reduce pressure and speed to refine the finish as abrasives break down.
- Inspect results and repeat if necessary.
- Wipe off residue with a clean, soft microfiber towel.
Finishing Tip (Manufacturer Recommendation)
- For extra refinement, the technical sheet recommends following with Micro SHR Super Hologram Remover using a finishing foam pad at low speed (1200 rpm).
Technical Specifications
| Product Type | Water-based polishing compound (DA optimized) |
| Abrasive Type | Engineered micro-abrasives (Aluminum Oxide) |
| Cut Level | Medium (6/10) |
| Gloss Level | High (8/10) |
| Appearance | Light green liquid |
| Odor | Mild, pleasant |
| pH | 8.0 – 9.0 |
| Viscosity | Medium |
| VOC | Low VOC (per manufacturer) |
| Flash Point | Non-flammable |
| Freeze/Thaw Stability | Stable |
| Reference | 141-0020 |
| Shelf Life | 2 years (stored properly) |
| Storage Temperature | 5°C – 35°C (41°F – 95°F) |
Available Sizes
| Size | Volume |
|---|---|
| Pint | 16 oz (473 ml) |
| Quart | 32 oz (948 ml) |
| Gallon | 3.748 L |
Safety & Handling (Summary)
- Use eye protection and gloves.
- Work in a well-ventilated area.
- Do not ingest. If swallowed, seek medical attention.
- Store sealed in a cool, dry place away from direct sunlight and extreme temperatures.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
